Products: Thin Set Product Description: Micro Milling Thin Set is a precision blend of Portland Cement, Processed Sand and special additives maufactured under stringent controls to ensure consistency and quality. It was developed using proven UK technology and has been successfully used on a number of projects in Trinidad and throughout the Caribbean. It has been tested by the Tile Council of America and meets ANSI Standards 118.1 and 118.4. Micro Milling Thinsets include: Regular Thinset (Grey) Regular Thinset (White) Premium Thinset (Grey) Premium Thinset (White) Characteristics: The product is characterised by ease of application, excellent workability and strong bond with optimum working time to compliment the skills of the tiler. Coverage: This will vary according to the thickness of the tile bed required but using a 1/4" x 1/4" notched trowel on an evenly prepared surface a 50lb bag will cover 35-50 square feet. Preparation: The surfaces to be tiled should be free from dirt, dust and other loose or weak material that could affect a bond. Where possible, substrates should be hosed or pressure-washed and a damp base (not saturated) will create the most superior bond strength. Substrates should be even to optimise the coverage of Micro Milling Thin Set. Mixing: Best results are acheived by mixing with a paddle whisk so as to activate all the ingredients of the Thin Set. Hand mixing can be used with water at the approximate strength of 3.5 litres per bag added until a smooth consistent mixture is achieved. Packaging: Micro Milling Thin Set is packaged in 50lb (22.4kg) multiwall paper sacks with a moisture barrier whithin to ensure a long shelf-life. The product should be stored in dry conditions, above the ground in well-ventilated areas for the best life expectancy. Cleaning: Hands and tools should be cleaned with clean water before material has set.